Almost every household has had a plumbing emergency at some point. This can be as a result of a leaky pipe, flooding, blocked drainage, or a backed-up sewer system. Some of these issues start as a small leak that most people will overlook until it turns out messy. Taking some time to have some of these issues fixed, such as the leaky faucet, pipe, or a slow drainage system can prevent a disaster or emergency in the long run. While some of these problems can be handled in a DIY, its advisable to have a certified plumber service your plumbing system every once in a while. Outlined below are some of the most common plumbing issues and how you can avoid them.
1. Blocked Drains
This is one of the most common plumbing problems today. A blocked drainage system can be as a result of collapsed, pipes, insufficient gradients, flushed foreign objects, or even damage from tree roots. Most cases of blocked drains are as a result of flushing foreign objects, which should be avoided for smoother running of the same. Checking to ensure the drainage system has a sufficient gradient is recommended too. While a few attempts to unblock the drain might work, you risk making it even worse. Consider calling an expert plumber to have the problem sorted out.
2. Leaky Taps and Pipes
Leaky taps, pipes, and faucets are standard in every household. Although the simple water drip may not seem like much, it can be hurting your water bills. One of the primary causes of tap leaks is overtightening the tap. Although you might be doing this to ensure there’s no leak, overdoing it only damages the O-rings and the washers. Consider turning the taps off just enough to ensure no water is running. Most pipes will show leaks on the joints. Have a plumber inspect and correct the cause of the leak to save the precious commodity, and reduce the risk of a flooded house/basement.
3. Overflowing Toilet
We have all had an issue with the toilet overflowing at some point. If not detected early, this problem can lead to flooding in no time. Nevertheless, should you notice an overflowing toilet, the first step would be to cut off its water supply. Turning off the inlet valve at the base of the toilet will always do the trick. If this doesn’t seem to work, turn off the main inlet valve until you have the problem figured out. An overflowing toilet may be as a result of blockage or worn-out valves.
These are some of the most common plumbing issues today. While some of these can be fixed in a DIY, you will always be safer in the hands of an experienced plumber. Always have a plumber’s contacts close-by in case of such cases and plumbing emergencies.